I remember a time when I had never heard of flamenco music, and didn’t know that flamenco guitars existed. This all changed when I began to build guitars; I started to occasionally travel to Spain, and began to seek out different types of guitar music. I think that it’s quite a normal thing for anyone outside of Spain, to not know much about flamenco music or guitars. Therefore, I thought it would be worth writing this post about it, as there is a huge catalogue of excellent flamenco guitar music, and also some beautiful flamenco guitars, which as I will explain, can also be used for classical music.
Differences between classical and flamenco guitars:
A big differences between flamenco and classical guitars are firstly the woods used. Traditionally, cypress is used for the back and sides. It’s a very light wood and gives a different sound to rosewood. Cypress was initially used because flamenco guitars are folk instruments, and cypress was cheap and easily available in Spain. Nowadays it's not cheap, but it’s still used because it can give that distinctive flamenco sound. Having said that, you can find flamenco guitars in a variety of woods. Mostly cypress and then rosewood. My most recent flamenco has flamed maple.
Another difference is that flamenco guitars have their strings lower. The action is lower over the fretboard and the strings are also lower at the bridge. Flamenco players need the lower string height to execute particular flamenco techniques. I aim for around 2.5/3mm at the 12th fret, whereas a classical guitar has an action of 3/4mm at the 12th fret. Some classical players like it even higher, however many like it lower too, and for them flamenco guitars are particularly comfortable. Sometimes, a player crosses over to the classical guitar, after initially learning to play electric or steel string, and they are horrified to discover the high action on classical guitars. For them, flamenco guitars should be considered too.
Flamenco players are seeking a different sound and have different priorities to classical players. Having said that, that doesn’t mean a flamenco guitar won’t be suitable for classical music. Flamenco right hand technique is so different - for one they play a lot closer to the bridge - that if a flamenco player were to play on a guitar, and then a classical player on the same guitar, it would be as if they were playing on two different instruments.
Flamenco guitars have a golpeador, a thin plastic sheet glued to the soundboard, allowing the player to strike the soundboard as he plays, a traditional flamenco technique. The golpeador doesn’t affect the sound, and may come as a relief to classical players who have struggled with dings on a french polished soundboard. I also think that in general flamenco guitarists have a different attitude regarding the finish of guitars; in the classical world, French polish is king, whereas in the flamenco world, generally lacquer is equally accepted. Usually on my instruments, I French polish and lacquer the back and sides. I’ve seen many classical concert guitarists use soundboard protectors that are basically the same as a golpeador, in order to protect the soundboard from general wear and tear.
My Flamenco Experience
The first flamenco guitar I built was almost by accident. I was building a batch of guitars, based on different plans in a guitar making book called “Making Master Guitars” by Roy Courtnall. One of those plans happened to be of a Santos Hernandez guitar, with cypress back and sides. It turned out extremely well - even though at that time I knew almost nothing of flamenco music - so well that I continue to develop my guitars, inspired by that initial plan.
My first actual flamenco experience came on a trip to a tonewood supplier in Valencia, where I saw a flamenco show. It was a great experience, with an incredible dancer and singers. It also turned out that the tonewood supplier loved flamenco music and recommended me the best guitarists to check out.
I started listening to more flamenco music. Flamenco music is Spanish folk music, the lyrics usually about love and usually the singers and dancers take centre stage rather than the guitar. I would build a flamenco guitar from time to time. When showing guitarists my work, I found it interesting that classical guitarists also found these flamenco guitars suitable, and have sold a number of flamenco guitars to classical guitarists who want another guitar with a different flavour.
There was a flamenco guitar I built during lockdown; I was delighted with it and I gave it to several players to try. Due to covid fears, I would drop the guitar off, leave the guitar for a week or so, then pick it back up. It was a fantastic way to get feedback as it gave the players time to really get to know the instrument. The most useful feedback came from a brilliant flamenco player called Tomas Jimenez. He had the guitar for a week or so, and brilliantly he also had three Gerundino guitars - a famous flamenco luthier - so had the best possible point of comparison. In the end I sold that guitar to a player in San Francisco.
Most recently, I built a flamenco guitar for the Antonio Marin Montero Competition in Granada in the summer of 2023. Rather than the usual cypress, I used flamed maple for the back and sides. I also used the highly decorative wood snakewood in this instrument. I had been given some tonewood from a retiring luthier that had been in his workshop for about 20 years. He himself had gotten the flamed maple from a retiring cello maker, so I really wanted to make a special instrument with it.
With this foundation I’m looking forward to building many more flamenco guitars of the highest quality. See below for a useful video on this topic from Madera Guitars, a guitar dealer.